The cord required for an AutoPilot Pool Pilot salt cell is NOT determined by the cell model # but instead by the model # of the AutoPilot Pool Pilot control unit/power supply. The chart below will help you determine which cord is needed for your cell. If you have any questions please contact us for assistance.
AutoPilot Pool Pilot makes 3 different style cell cords. The connection at the cell is always the same however the connection at the control box is different among the 3 cord options. Our cross reference below should assist you in determining which cord is needed for your control box. If you have any questions please contact us.
First, you’ll need to know the model # of your Pool Pilot control box. To determine this look for a label on the left side of the control box as shown in the photos below. If you’re unable to locate this label please contact us for additional assistance.
AutoPilot Pool Pilot
Cell Cord Cross Reference Guide
The AutoPilot Pool Pilot 952-ST/DIG cell cord has red and black connections at the power supply. They look very similar to RCA jacks used on a VCR.
The AutoPilot Pool Pilot 952 cell cord (also referred to as 952-SVC) has a three prong while clip plug connection at the power supply.
The AutoPilot Pool Pilot 17206 cell cord has a hard wired connection at the power supply. This is the least common of the 3 options.
| Pool Pilot Digital DIG-220 | Cell Cord "A": 952-ST/DIG |
| Pool Pilot Digital 75003 | Cell Cord "B": 952 |
| Pool Pilot Digital Nano (75040, 75041, 75041A) |
Cell Cord "B": 952 |
| Pool Pilot Digital Nano Plus | Cell Cord "B": 952 |
| Pool Pilot Soft Touch ST-220 | Cell Cord: "A": 952-ST/DIG |
| Pool Pilot Professional | Cell Cord: 17206 |
| Pool Pilot EcoNano | Cell Cord "B": 952 |
| Pool Pilot AG | Cell Cord "B": 952 |
